Bộ truyền tín hiệu IDK NJR-T01UDH
Thông số kỹ thuật:
| Item | NJR-T01UHD (Transmitter) | ||
| Model | MM / SM | CAT | |
|
Input |
1 inputHDMI (*1) / DVI 1.0
TMDS single link HDCP 1.4 / 2.2 HDR (*2) EDID emulation Connector: Female HDMI Type A (19-pin) (*3) |
||
|
Output |
1 inputDigital signal for
extension Connector: 2 LCs |
1 inputDigital signal for
extension Connector: RJ-45 |
|
| 1 inputHDMI (*1) / DVI 1.0
*For monitoring input signals TMDS single link HDCP 1.4 / 2.2 HDR (*2) Connector: Female HDMI Type A (19-pin) (*3) |
|||
| Format | VGA / SVGA / XGA / W XGA (1280×768) / W XGA (1280×800) / Quad-VGA / SXGA / W XGA (1360×768) / WXGA (1366×768) / SXGA+ / W XGA+ / W XGA++ / UXGA / W SXGA+ / VESAHD / W UXGA / QW XGA / 4K (*4)480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4) | ||
| Color depth | 24 bit, 30 bi, 36 bit Deep Color (*5) | ||
| Dot clock | 25 MHz to 600 MHz | ||
| TMDS clock | 25 MHz to 300 MHz | ||
| TMDS data rate | 0.75 Gbps to 18 Gbps | ||
|
Digital audio input |
Multi-channel linear PCM up to 8 channelsSampling frequency: 32 kHz to 192 kHz Sample size: 16 bit to 24 bit
Reference level: -20 dBFS Max. input level: 0 dBFS |
||
|
Digital audio output |
Multi-channel linear PCM up to 8 channels Sampling frequency: 32 kHz to 192 kHzSample size: 16 bit to 24 bit Reference level: -20 dBFS Max. output level: 0 dBFS | ||
|
Analog audio input |
1 inputStereo L/R balanced / unbalanced
Input impedance: 48 kΩ balanced / 24 kΩ unbalanced Reference level: -10 dBu Max. input level: +10 dBu Connector: 5-pin terminal block |
||
|
Analog audio output |
1 inputStereo L/R balanced / unbalanced
Output impedance:100 Ω balanced / 50 Ω unbalanced Reference level: -10 dBu Max. output level: +10 dBu Connector: 5-pin terminal block |
||
|
Cable for extension |
Cable | Duplex fiber cable, SFP+ module | Cat6A STP cable |
|
Polishing (*6) |
SFP+ for Multimode:PC polishing (recommended)
SFP+ for Singlemode: UPC polishing (recommended), SPC supported * APC is not supported |
－ | |
|
Maximum extension distance |
Multimode fiber (OM3):984 ft. (300 m)
Singlemode fiber (OS1): 6.21 mi. (10 km) Singlemode fiber (OS1): 24.85 mi. (40 km, optional) (*7) |
Cat6A STP: 328 ft. (100m) (*8) | |
| Control | RS-232C | 1 port / male D-sub (9 pin), full duplex, up to 115.2 kbps | |
| LAN | 1 port / RJ-45 10Base-T / 100Base-TX / 1000Base-T (Auto Negotiation), Auto MDI / MDI-X | ||
|
General |
AC adapter | Input: 100 – 240 VAC ± 10%, 50 Hz / 60 Hz±3 Hz Output: DC 12 V 3 A (A dedicated AC adapter is provided) | |
| Power consumption | About 18 W atts | About 21 W atts | |
| Dimensions | 8.3 (W) × 1.2 (H) ×5.5 (D)” (210 (W) × 30 (H) × 140 (D) mm) (EIA thin high, half rack wide) (Excluding and the like)connectors | ||
| Weight | 2.2 lbs (1.0 kg) | 2.2 lbs (1.0 kg) | |
| Temperature | Operating: 32°F to 104°F (0°C to 40°C)Storage: -4°F to +176°F (-20°C to 80°C) | ||
| Humidity | Operating / Storage: 20% to 90% (Non Condensing) | ||
